TADF-OLED:励起エネルギーを再利用し、青・緑・白色発光を高効率化する分子設計

キーワード / Keywords

  1. 熱活性化遅延蛍光(TADF) / Thermally activated delayed fluorescence
    日本語: 熱エネルギーを利用して三重項励起子を発光可能な一重項へ戻す仕組みです。重金属を使わず、OLED内部の励起エネルギーを有効利用できます。
    English: TADF uses thermal energy to convert triplet excitons back into emissive singlet states. It can improve exciton use in OLEDs without relying on heavy-metal emitters.
  2. 逆項間交差 / Reverse intersystem crossing
    日本語: 三重項状態から一重項状態へ励起エネルギーが移る過程です。二つの状態のエネルギー差が小さいほど起こりやすく、TADFの効率を左右します。
    English: Reverse intersystem crossing transfers excitation energy from a triplet state to a singlet state. A small energy gap between the states generally facilitates this process.
  3. 多重共鳴 / Multi-resonance
    日本語: 分子内の電子分布を原子単位で局在化し、発光スペクトルを狭くする設計です。高い色純度と励起子利用を両立するOLED材料に使われます。
    English: Multi-resonance design localizes electron density at the atomic scale and narrows the emission spectrum, supporting OLEDs with both high color purity and efficient exciton use.
  4. 凝集誘起発光 / Aggregation-induced emission
    日本語: 分子が集まることで動きが抑えられ、発光が強くなる現象です。固体状態での消光を避け、薄膜デバイスで明るく光らせる方法として利用されます。
    English: Aggregation-induced emission occurs when molecular aggregation restricts motion and strengthens emission. It can reduce solid-state quenching in thin-film optoelectronic devices.
  5. 狭帯域発光 / Narrowband emission
    日本語: 限られた波長範囲へ光を集中させる発光です。発光帯が狭いほど色の純度が高まり、広い色域をもつ高精細ディスプレイに役立ちます。
    English: Narrowband emission concentrates light within a limited wavelength range. A narrower spectrum improves color purity for high-definition, wide-color-gamut displays.

日本語版

熱を利用して、光になりにくい励起状態を回収する

OLEDでは、電子と正孔が結び付くと一重項と三重項という異なる励起状態が生まれます。一般的な蛍光材料では三重項のエネルギーを発光へ使いにくいのに対し、TADF材料は周囲の熱を利用して三重項を一重項へ戻し、遅れて蛍光を放ちます。

この仕組みを高性能な素子へつなげるには、一重項と三重項のエネルギー差、分子の剛直性、凝集時の分子運動、発光スペクトルの幅を同時に整える必要があります。ここでは、青色、緑色、白色のTADF-OLEDを扱った3件の研究を紹介します。

1. 金属を使わない青色TADF材料をOLEDとLEECへ展開

この研究では、ヘキサヒドロキサンテンジオンを電子受容部、カルバゾールを電子供与部とする二種類の分子を設計しました。分子のつながり方を調整し、電子軌道の分離、分子の剛直性、固体での発光を改善しています。

  • 密度汎関数理論計算により、最高被占軌道と最低空軌道が空間的に分離していることを確認しました。
  • 一重項と三重項のエネルギー差は、色素1で0.09 eV、色素2で0.03 eVでした。
  • 小さなエネルギー差により、三重項から一重項へ戻る逆項間交差が促進されました。
  • 凝集誘起発光の効果により、固体状態のフォトルミネッセンス量子収率は最大73%に達しました。
  • 色素2を用いた非ドープ型OLEDは、最大外部量子効率9.21%を示しました。
  • 最大輝度は25,000 cd/m²を超えました。
  • イオン液体を組み込んだ溶液塗布型発光電気化学セルでは、445 nmの安定した青色発光が得られました。

同じ発光分子を、真空成膜型OLEDと溶液塗布型デバイスの両方へ応用した点が特徴です。分子の剛直性と電荷移動状態を整えることが、金属を使わない青色発光材料の性能向上につながっています。

2. 異性体設計と立体保護で、色純度の高い緑色TADF-OLEDを実現

緑色ディスプレイでは、発光効率だけでなく、国際的な広色域規格に近い鮮明な色を得ることが重要です。この研究では、インドロカルバゾールの結合位置が異なる二種類の多重共鳴TADF材料を作り、周囲へかさ高いメシチル基を配置しました。

  • Mes-b-ICzBNとMes-c-ICzBNという二種類の緑色発光材料を設計しました。
  • 剛直なインドロカルバゾール骨格が多重共鳴領域を広げ、励起時の構造変化を抑えました。
  • 周囲のメシチル基が分子同士の過度な接近を防ぎ、凝集による発光帯の広がりを抑えました。
  • 分子の異性体構造を変えることで、発光ピークを細かく調整しました。
  • OLEDの色度座標は(0.25, 0.70)と(0.22, 0.71)でした。
  • 発光半値全幅はそれぞれ26 nmと27 nmでした。
  • 最大外部量子効率は33.3%と30.6%でした。
  • バックプレーン駆動回路と組み合わせ、アクティブマトリクスOLEDパネルを用いた高ダイナミックレンジの小型プロジェクター試作機を構築しました。

分子材料の開発から実際の表示パネルまで展開した研究です。電子状態の制御と、分子同士を近づけすぎない立体設計が、高効率と高色純度の両立に役立っています。

3. 一つの分子から青色と黄色を同時に出し、白色OLEDを作る

白色OLEDでは、通常、異なる色を発する複数の材料を組み合わせます。しかし、材料ごとの劣化速度やエネルギー移動の偏りにより、電圧や時間とともに色が変化する場合があります。この研究では、一種類のTADF分子が凝集したときに青色と黄色を同時に発する仕組みを利用しました。

  • 2tCz-2tBOという、平面型の電子供与部と二つの多重共鳴受容部をもつ分子を設計しました。
  • スピロフルオレン結合を用いて、供与部と受容部がほぼ平行に配置される構造を作りました。
  • 立体的な分離により、分子内空間を介した複数の電荷移動状態を形成しました。
  • 凝集状態では、青色発光と黄色発光が同時に生じました。
  • 二つの遅延蛍光を一つの分子から得ることで、白色発光を構成しました。
  • 最適化した白色OLEDの最大外部量子効率は8.4%でした。
  • 動作電圧を変えても、白色の発光スペクトルは安定していました。

単一成分で白色を作ることにより、複数の発光材料を混ぜる素子の複雑さを減らし、色安定性を高める可能性を示しています。

研究全体から見えること

3件の研究は、TADFの性能を異なる方法で引き出しています。

  • 青色材料では、電子供与部と受容部の配置を調整し、逆項間交差と固体発光を高めています。
  • 緑色材料では、多重共鳴骨格、異性体構造、立体保護を組み合わせて、効率と色純度を両立しています。
  • 白色材料では、一分子内に複数の電荷移動状態を作り、凝集時の二色発光を利用しています。

TADF-OLEDの進歩には、単にエネルギー差を小さくするだけでなく、分子の形、振動、凝集、電荷輸送、発光帯の幅まで含めた統合的な設計が重要です。


TADF OLEDs: Molecular Designs for Efficient Blue, Green, and White Emission

English Version

Recovering difficult-to-use excited states with thermal energy

When electrons and holes combine in an OLED, they form singlet and triplet excited states. Conventional fluorescent emitters cannot readily use triplet energy. TADF materials use ambient thermal energy to convert triplets back into emissive singlets, producing delayed fluorescence.

High-performance TADF requires simultaneous control of the singlet–triplet energy gap, molecular rigidity, aggregation, charge transport, and emission bandwidth. The following three studies demonstrate these principles in blue, green, and white OLEDs.

1. Metal-free blue TADF emitters for OLEDs and LEECs

This study designed two molecules using hexahydroxanthene dione as an electron acceptor and carbazole units as electron donors. Molecular topology was adjusted to control orbital separation, rigidity, charge transfer, and solid-state emission.

  • Density-functional calculations showed spatial separation between the highest occupied and lowest unoccupied molecular orbitals.
  • Singlet–triplet energy gaps were 0.09 eV for dye 1 and 0.03 eV for dye 2.
  • The small gaps facilitated reverse intersystem crossing.
  • Aggregation-induced emission supported solid-state photoluminescence quantum yields of up to 73%.
  • A non-doped OLED using dye 2 achieved a maximum external quantum efficiency of 9.21%.
  • Maximum luminance exceeded 25,000 cd/m².
  • Solution-processed light-emitting electrochemical cells incorporating an ionic liquid produced stable blue emission at 445 nm.

Applying the same class of emitters to both vacuum-deposited OLEDs and solution-processed devices demonstrates the value of coordinating molecular rigidity and charge-transfer character.

2. Isomer engineering and steric shielding for color-pure green OLEDs

Green displays require not only high efficiency but also emission close to wide-color-gamut standards. This study prepared two multi-resonance TADF emitters with different indolocarbazole connectivities and protected their peripheries with bulky mesitylene groups.

  • Mes-b-ICzBN and Mes-c-ICzBN were developed as narrowband green emitters.
  • Their rigid indolocarbazole fragments extended the multi-resonance framework and limited structural relaxation.
  • Bulky mesitylene groups reduced aggregation-induced spectral broadening.
  • Isomer engineering enabled fine adjustment of the emission peak.
  • OLED color coordinates were (0.25, 0.70) and (0.22, 0.71).
  • Emission bandwidths were 26 and 27 nm.
  • Maximum external quantum efficiencies reached 33.3% and 30.6%.
  • The OLEDs were integrated with backplane drivers to demonstrate a high-dynamic-range active-matrix pico-projector prototype.

The work links molecular engineering with an operating display prototype, showing how electronic structure and steric protection can jointly improve efficiency and color purity.

3. White electroluminescence from a single TADF molecule

White OLEDs commonly combine several emitters, but differences in energy transfer and degradation can change their color with voltage or operating time. This study instead used one TADF molecule that simultaneously produced blue and yellow emission after aggregation.

  • The molecule 2tCz-2tBO contained one planar donor and two multi-resonance acceptors.
  • Spirofluorene linkers created a near-parallel acceptor–donor–acceptor geometry.
  • Steric separation promoted multiple through-space charge-transfer states.
  • Blue and yellow emission appeared simultaneously in the aggregated state.
  • Two delayed-fluorescence channels within one molecular system generated white light.
  • The optimized white OLED reached a maximum external quantum efficiency of 8.4%.
  • Its white electroluminescence spectrum remained stable across a range of operating voltages.

Single-component white emission may reduce the structural complexity and color-instability risks associated with multi-emitter devices.

Overall significance

The studies activate TADF through different molecular strategies.

  • The blue emitters coordinate donor–acceptor topology, reverse intersystem crossing, and solid-state emission.
  • The green emitters combine multi-resonance design, isomer selection, and steric shielding.
  • The white emitter creates multiple through-space charge-transfer states and aggregation-induced dual emission within one molecule.

Progress in TADF OLEDs therefore depends on more than minimizing the singlet–triplet energy gap. Molecular shape, vibration, aggregation, charge transport, and spectral width must be designed together.


文献 / References

  1. Nasiri, S.; Anandan, M.; Managutti, P. B.; Mohamed, S.; Nunzi, J. M.; Nutalapati, V.; Starha, P.; Maleksaeedi, S. “A new molecular configuration of TADF hexahydroxanthene dione (HHXD) derivatives for the fabrication of OLEDs and LEECs.” Chemical Engineering Journal, 549 (2026), 182335. DOI: 10.1016/j.cej.2026.182335.
  2. Zhang, Q.; Zhang, X.; Xu, H.; Wang, Z.; Shao, H.; Huang, S.; Luo, J.; Guo, R.; Ding, K.; Wang, L. “High-Performance Narrowband Green OLEDs Enabled by Indolocarbazole Isomer Engineering and Steric Shielding.” Small (2026), Early Access. DOI: 10.1002/smll.76228.
  3. Li, H.-Z.; Xie, F.-M.; Yang, Y.-T.; Zhao, Y.-C.; Li, Y.-Q.; Tang, J.-X. “Achieving White Electroluminescence from a Single-Component Emitter by Harnessing Aggregation-Induced Dual Delayed Fluorescence.” Advanced Optical Materials (2026), Early Access. DOI: 10.1002/adom.71931.