OLEDのエキシプレックス:分子の組み合わせから高効率・高色純度の発光を生み出す

キーワード / Keywords

  1. エキシプレックス / Exciplex
    日本語: 異なる二つの分子が励起状態で接近したときにできる発光状態です。電子を与える分子と受け取る分子の組み合わせにより、発光色やエネルギー移動を調整できます。
    English: An exciplex is an emissive excited state formed between two different molecules. Selecting the electron donor and acceptor makes it possible to tune color and energy-transfer behavior.
  2. 熱活性化遅延蛍光 / Thermally activated delayed fluorescence
    日本語: 熱の助けで三重項励起子を一重項へ戻し、蛍光として利用する仕組みです。通常は使いにくい励起エネルギーを回収し、OLEDの効率を高めます。
    English: Thermally activated delayed fluorescence uses thermal energy to convert triplet excitons back into emissive singlet states, recovering excitation energy that conventional fluorescence cannot fully use.
  3. 共ホスト / Co-host
    日本語: 発光材料を支える母材として、二種類以上の分子を組み合わせた系です。電荷輸送と励起子生成を整え、発光体へのエネルギー移動を助けます。
    English: A co-host combines two or more host materials around an emitter. It can balance charge transport, promote exciton formation, and transfer energy efficiently to the final emitting molecule.
  4. フォースター共鳴エネルギー移動 / Förster resonance energy transfer
    日本語: 一方の分子の発光と他方の吸収が重なると、光を出さずに励起エネルギーが移る現象です。高効率発光と色純度の向上に利用されます。
    English: Förster resonance energy transfer moves excitation energy without photon emission when donor emission overlaps acceptor absorption. It is widely used to improve efficiency and color purity.
  5. 効率ロールオフ / Efficiency roll-off
    日本語: OLEDを明るくしたとき、外部量子効率が低下する現象です。励起子の集中や電荷の偏りを抑え、輸送しやすい分子構造にすることが対策になります。
    English: Efficiency roll-off is the decline in OLED efficiency at high brightness. Reducing exciton crowding and charge imbalance through appropriate molecular design can help suppress it.

日本語版

二つの分子が協力して生み出す発光

OLEDでは、電子と正孔が結び付いて励起子が生まれ、そのエネルギーが光へ変わります。異なる分子を電子供与体と電子受容体として組み合わせると、両者の間にエキシプレックスという励起状態を作ることができます。

エキシプレックスは、発光体として直接利用できるだけでなく、色純度の高い別の発光材料へエネルギーを渡す中継点にもなります。ここでは、長波長発光、狭帯域MR-TADF発光、溶液塗布型OLEDという三つの研究を紹介します。

1. 剛直な電子供与体で、緑から橙赤色の高効率エキシプレックスを実現

長波長の発光では、励起エネルギーが分子振動などへ逃げやすくなります。この研究では、二つのフェナジン単位を融合した剛直で窒素に富む電子供与体「3N」を設計し、平面型のホウ素含有受容体と組み合わせました。

  • 3Nは高い平面性と、−4.88 eVという浅いHOMO準位をもちます。
  • 剛直な骨格が励起後の構造緩和を抑え、3N単独では456 nmの狭い発光を示しました。
  • 3Nと平面型受容体の強い分子間相互作用により、緑色から橙赤色までのエキシプレックス発光を形成しました。
  • 代表的な二つの系は、557 nmで92%、604 nmで78%のフォトルミネッセンス量子収率を示しました。
  • OLEDの最大外部量子効率は、556 nmの素子で25.6%、586 nmの素子で24.7%でした。
  • 剛直性と電子供与性を同時に高めることが、長波長域での非放射損失の抑制につながりました。

分子間で発光状態を作りながら、分子自体の変形を抑えることが、高効率な長波長OLEDの重要な設計要素であると示しています。

2. エキシプレックス共ホストからMR-TADF発光体へエネルギーを移す

この研究では、二つのN-フェニルカルバゾール単位の連結位置を変えた三種類の電子供与体を作製しました。電子受容体PO-T2Tと組み合わせて空色のエキシプレックスを形成し、さらに狭帯域発光材料DtBuCzBへエネルギーを移しました。

  • BCzPh-31、BCzPh-32、BCzPh-34という三種類のビカルバゾール供与体を比較しました。
  • 連結位置の違いが、分子の平面性、分子間相互作用、三重項エネルギーに影響しました。
  • PO-T2Tとの1対1混合物は、505~537 nmに発光する空色エキシプレックスを形成しました。
  • 一重項と三重項のエネルギー差は0.05~0.08 eVで、TADF特性が確認されました。
  • エキシプレックス共ホストだけを用いたOLEDの最大外部量子効率は9.0~10.8%でした。
  • 共ホストの発光とDtBuCzBの吸収が重なり、効率的なフォースター共鳴エネルギー移動が起こりました。
  • BCzPh-34:PO-T2TへDtBuCzBを2 wt%添加したOLEDは、最大外部量子効率16.1%、発光半値全幅34.5 nmを示しました。

エキシプレックスで励起子を効率よく集め、最終的な発光を色純度の高いMR-TADF材料へ任せる二段階の設計です。

3. 一分子内に供与体と受容体を組み込み、溶液塗布型OLEDを安定化

一般的な二成分エキシプレックスでは、材料同士の溶けやすさの違い、膜の不安定化、相分離が問題になる場合があります。この研究では、電子供与部と電子受容部を非共役のフルオレン骨格で一分子につなぎ、単一分子型エキシプレックスホストを作製しました。

  • 同じ電子供与部と異なる電子受容部を組み合わせたFL-PN1、FL-PN2を設計しました。
  • 溶液中では、受容体構造に応じて異なる分子内フォースター共鳴エネルギー移動が観察されました。
  • 固体状態では、両材料が分子間電荷移動型のエキシプレックスを形成しました。
  • 一重項と三重項のエネルギー差は小さく、TADFホストとして働きました。
  • FL-PN1のフォトルミネッセンス量子収率は84.3%、FL-PN2は79.9%でした。
  • 溶液塗布型緑色OLEDの最大外部量子効率は、FL-PN1で23.6%、FL-PN2で19.7%でした。
  • FL-PN1の高い効率には、高い発光量子収率と、より均衡した電荷輸送が寄与しました。

供与体と受容体を一つの分子に固定することで、二成分材料で起こりやすい膜形成上の問題を抑えながら、受容体構造の効果を明確に比較できる設計です。

研究全体から見えること

三つの研究は、エキシプレックス性能を高めるための異なる方法を示しています。

  • 長波長型では、剛直で電子供与性の高い分子により非放射損失を抑えます。
  • 共ホスト型では、エキシプレックスを励起エネルギーの中継点として利用します。
  • 単一分子型では、供与体と受容体を共有結合でまとめ、溶液塗布膜の安定性を高めます。

エキシプレックスは、二つの分子を混ぜれば自動的に高性能になる仕組みではありません。分子の連結位置、剛直性、電子準位、スペクトルの重なり、電荷輸送を一体として設計することが重要です。


Exciplex OLEDs: Creating Efficient, Color-Pure Emission through Molecular Partnerships

English Version

Light produced through cooperation between two molecular components

In OLEDs, electrons and holes combine to form excitons whose energy is converted into light. Pairing an electron donor with an electron acceptor can create an excited state known as an exciplex.

An exciplex can emit directly or act as an energy-transfer intermediate for another color-pure emitter. The following three studies address long-wavelength exciplex emission, exciplex co-hosts for MR-TADF OLEDs, and single-molecule exciplex hosts for solution processing.

1. A rigid donor enabling efficient green-to-orange-red exciplexes

Long-wavelength emission is vulnerable to energy loss through molecular vibration and other non-radiative pathways. This study designed a rigid, nitrogen-rich donor called 3N by fusing two phenazine units and paired it with planar boron-containing acceptors.

  • 3N showed strong planarity and a shallow HOMO level of −4.88 eV.
  • Its rigid framework suppressed excited-state structural relaxation and produced narrow emission at 456 nm.
  • Strong interactions with planar acceptors produced exciplex emission spanning green to orange-red.
  • Two representative systems reached photoluminescence quantum yields of 92% at 557 nm and 78% at 604 nm.
  • Their OLEDs achieved maximum external quantum efficiencies of 25.6% at 556 nm and 24.7% at 586 nm.
  • Combining rigidity with strong electron donation reduced non-radiative losses in the long-wavelength region.

The results show that limiting molecular deformation while creating a donor–acceptor excited state is an effective strategy for long-wavelength OLEDs.

2. Energy transfer from an exciplex co-host to an MR-TADF emitter

This study prepared three donors by changing the linkage positions between two N-phenylcarbazole units. Each donor was blended with PO-T2T to form a sky-blue exciplex and then used to transfer energy to the narrowband MR-TADF emitter DtBuCzB.

  • BCzPh-31, BCzPh-32, and BCzPh-34 were compared.
  • Linkage patterns affected molecular conformation, intermolecular interactions, and triplet energies.
  • Their 1:1 blends with PO-T2T emitted at 505–537 nm.
  • Singlet–triplet energy gaps were 0.05–0.08 eV, supporting TADF behavior.
  • OLEDs based on the undoped exciplex co-hosts achieved maximum external quantum efficiencies of 9.0–10.8%.
  • Spectral overlap between exciplex emission and DtBuCzB absorption enabled efficient Förster resonance energy transfer.
  • A device using 2 wt% DtBuCzB in a BCzPh-34:PO-T2T co-host reached 16.1% maximum external quantum efficiency with a 34.5 nm emission bandwidth.

This is a two-stage approach in which the exciplex collects excitation energy and a color-pure MR-TADF emitter produces the final light.

3. A single-molecule exciplex host for stable solution-processed OLEDs

Conventional binary exciplex systems may suffer from solubility mismatch, morphological instability, and phase separation. This study connected donor and acceptor units within one molecule through a non-conjugated fluorene linker.

  • FL-PN1 and FL-PN2 used the same donor but different acceptor structures.
  • In solution, they showed different intramolecular Förster energy-transfer behavior governed by the acceptor.
  • In the solid state, both formed intermolecular charge-transfer exciplexes.
  • Their small singlet–triplet energy gaps enabled TADF host behavior.
  • Photoluminescence quantum yields were 84.3% for FL-PN1 and 79.9% for FL-PN2.
  • Solution-processed green OLEDs achieved maximum external quantum efficiencies of 23.6% for FL-PN1 and 19.7% for FL-PN2.
  • The better performance of FL-PN1 was associated with its higher emission yield and more balanced charge transport.

Covalently integrating donor and acceptor units can reduce film-formation problems while revealing how acceptor structure controls excited-state behavior.

Overall significance

The three studies provide different routes to improved exciplex OLEDs.

  • Long-wavelength systems use rigid, strongly donating molecules to reduce non-radiative loss.
  • Co-host systems use the exciplex as an energy-transfer intermediate.
  • Single-molecule systems bind donor and acceptor components together to improve solution-processed film stability.

High performance does not result simply from mixing two molecules. Molecular connectivity, rigidity, energy levels, spectral overlap, and charge transport must be designed together.


文献 / References

  1. Fu, Y.; Wang, T.; Chen, G.; Tian, Y.; Chen, Z.; Hu, J.-T.; Li, Y.; Yang, Z.; Yang, G.-X.; Li, M.; Kido, J.; Su, S.-J. “Dibenzophenazine-Fused Heterocyclic Luminophores: Decoding High-Performance Organic Light-Emitting Diodes Based on Long-Wavelength Exciplex.” Angewandte Chemie International Edition (2026), Early Access. DOI: 10.1002/anie.2974644.
  2. Kim, H. Y.; Lee, Y.; Lee, S.; Kim, S.; Cho, M. J.; Choi, D. H.; Park, S. “Fluorene-Linked Single-Molecule Exciplex Hosts With Acceptor-Dependent Energy Transfer and Exciplex Formation for TADF OLEDs.” Advanced Optical Materials (2026), Early Access. DOI: 10.1002/adom.71952.
  3. Yi, R.-H.; Kung, Y.-C.; Chen, Y.-Y.; Chen, Y.-S.; Hung, W.-Y.; Wong, K.-T. “Exciplex-forming co-host systems employing topology-derived bicarbazoles for MR-TADF OLEDs.” Journal of Materials Chemistry C (2026), Early Access. DOI: 10.1039/d6tc02423h.